Fall/Winter Wood Care

Get your wood ready for winter with a simple, practical plan. Quick steps below.

Exterior wood care: deck, siding, furniture

• Inspect for cracks/loose fasteners; replace as needed

• Clean thoroughly (deck cleaner or gentle wash); remove mildew

• Seal with a weather-appropriate finish (penetrating sealant for cedar/redwood; water-based for pine/spruce)

• Apply two coats in dry, mild weather; recoat every 2–3 years

  
  

Indoor wood care: floors, shelves, furniture

• Vacuum or brush regularly; wipe with a damp cloth

• Maintain indoor humidity around 40–50% to prevent warping

• For hardwood floors, use a recommended cleaner and avoid excess moisture

• Tighten loose screws; refresh finishes on shelves/cabinets if needed

  
  

Finishes and products to consider

• Oil-based polyurethanes: deeper tint, longer protection

• Water-based polyurethanes: low odor, quick cure

• Penetrating sealants: exterior wood that stays outdoors

• UV-safe stains for sun-exposed surfaces

When you are ready to start your fall projects, stop by S.J. Neathawk Lumber for expert help and guidance finding the right products for your project.